EFITuning-101

Engine Managment System information and performance info for electronic fuel injected automobiles
 
HomePortalFAQRegisterLog in

Share | 
 

 What is Hondata-S200/S300

View previous topic View next topic Go down 
AuthorMessage
BLOWN99CIVICSI
Founder/Admin
avatar

Male Number of posts : 110
Age : 37
Location : Florida
Reputation :
999 / 100999 / 100

Registration date : 2008-02-08

PostSubject: What is Hondata-S200/S300   Fri Feb 08, 2008 6:08 pm

Hondata systems are available for OBDI Honda Acura ECUs only.
A Hondata system consists of additional components which are added to the standard ECU to allow the ECU to use a Hondata program. An interface box is then connected to the ECU which contains circuitry for datalogging, stores rev limits and interfaces to switches in the vehicle. Optionally a clutch switch, push button and datalogging cable may be installed. Collectively all this is known as a Hondata system.

There are 3 different type of system which are The S100 which is the basic setup, The S200 which is the middle grade unit, and the S300 being the top of the line unit. Due to size limitations in posts we cannot give the difference table between the 3 systems in this post showing the simularaties and differences, So we will post them in the topic titled Hondata system feature table. One a scale from 1-10 with 10 being the best, we rate this system at a 8 as unlike Crome and Ectune, Hondata does have constant customer support and tech lines when troubleshooting or receiving warrenty information.

Thank Hondata for the provided info
Back to top Go down
View user profile http://efituning101.darkbb.com
 
What is Hondata-S200/S300
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Shafts: DG S200 Vs PX 5.5
» sluggish 95 riv
» pics of my truck and my G/Fs truck
» ECU wiring for EF-SE (.6L non turbo)
» DG s200 AMT shaft

Permissions in this forum:You cannot reply to topics in this forum
EFITuning-101 :: Hondata/K-Pro :: General Discussion-
Jump to: